Waterproof Solder Heat Shrink Butt Wire Connector Yellow 12-10 AWG

Waterproof Solder Heat Shrink Butt Wire Connector Yellow 12-10 AWG

Specification
Shrinkage ratio 3:1
Waterproof Rate: IP67
AWG 12-10Yellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm²


Operating Temperature Range:
Operating temperature: -55°C ~ 125°C
Minimum temperature for solder to melt: 138°C
Minimum shrink temperature: 80°C
Minimum for solder to fully melt temperature: 180°C
Shrink temperature: ＞160°C
Dielectric strength: 1kv


Features
These solder seal wire connectors no need to crimp, simply position the stripped wires into the solder sleeve and heat uniformly to finish the connection.
Its dual-walled design (polyolefin tubing outside, hot melt adhesive and solder inside) ensures a perfect insulation and waterproof performance and also prevents wire corrosion even in the humid environments.
The inside solder's hot melt characteristics ensure a strong tensile strength and tear resistance. When heating, the solder melts to strongly hold the wire, never slip out of the connector.