Collision Switch Toggle Collision Limit Switch With Wires

Product details of Collision Switch Toggle Collision Limit Switch With  Wires
This switch module is often known as a collision, impact or limit switch. It is used to detect when a robotic vehicle collides with an object, limit switches for detecting when something like a 3D printer head has reached its travel limit.
A microswitch with a lever is mounted on the module. The module's output is generally maintained HIGH by a 10K pull-up resistor. The output is dragged to the ground and becomes LOW when the switch lever is pressed, and the LED on the module lights up.

Specification of Collision Switch Toggle Collision Limit Switch With  Wires
Module Description:
1. A switch module installation forefront of collision, the module output low, there is no collision, the output high.
2. Module reserved M3 mounting holes for easy fixing in a small car.
3. Module size: 2.5cm * 1.9cm
4. with a light switch, there is a collision, lights, no collision lights out.

Module Pin Description
1. vcc 3v-12v power supply
2. gnd then the power ground
3. OUT high and low output