5V Solar Energy Panel Tracking Sensor Module Single Axis

5V Solar Energy Panel Tracking Sensor Module Single Axis

Description:
single axis light source tracking board
Size    35*16*1.2mm
Voltage    DC 5-5.5V
Current    <1.5A
Interface    power +/-, motor M

Principle:
put a shelter on the photosensitive resistor; when the light shines on the shelter and forms a
shadow, one resistor generates a difference with another resistor; control the motor and to
find the balance point, that is the central point of the light source

Applications:
reduction motors; the slower of the speed is, the better it will be. We recommend use JGY370
 6V. When the power supply is 5V, it has no load and stable speed. If the speed of is too fast,
the motor will not aim at the light source and sway but not shake. This circuit adopts anti-
shaking short delay

Connection:
when the motor connects the board, there is no difference of positive and negative. When
testing, if the motor rotates toward the opposite direction of the light source, then change the
motor wire position

Note: the power should be stable volt 5-5.5V, and it cannot connect the solar board

Wiring diagram:
1.Probe wire length is 15cm
2.Encryption chip, and it can not be decoded