M1.7x8mm Phillips Flat Head Countersunk Head Machine Screw A2 Stainless Steel

Product details of M1.7x8mm Phillips Flat Head Countersunk Head Machine Screw A2 Stainless Steel
The Phillips Pan Head Screw M1.7 is a machine screw with a head that is flat on top and slightly rounded with short vertical sides. A Phillips drive is x-shaped for installation with a Phillips screwdriver. Their low head height and large diameter provide increased driving power. Phillips screws have a set of radial indentations set at 45° from the main cross recess on the head of the screw which makes them different from the normal screw heads. This prevents the screwdriver from popping out of the screw and consequent head damage. The screw allows more torque to be applied to it. The base material of the screw is stainless steel, which offers good physical properties. Stainless steels are iron-based alloys, which contains a minimum of chromium of around 10.5%. The presence of chromium offers corrosion resistance to stainless steel and helps to resist scaling at elevated temperatures. Stainless steel also maintains excellent toughness.

Specification of M1.7x8mm Phillips Flat Head Countersunk Head Machine Screw A2 Stainless Steel
Diameter: M1.7 / 1.7mm
Thread Size: 0.40 - Coarse (Standard) Thread
Length: 10mm
Drive Size (m): 3.6mm H1 / Phillips #1
Thread Diameter (d): 1.7mm
Thread Length(L): 8mm
Thread Pitch (P): 0.35mm
Head Size (dk*k): 2.0 x 0.6mm
Type: Pan Head Machine Screw (Type H)
System of Measurement: Metric
Material: Stainless Steel A2 / 18-8
Specifications: DIN 7985A / ISO 7045