WS2812 5050 RGB 8-Bit LED Development Board 5V

Product details of WS2812 5050 RGB 8-Bit LED Development Board
8-bit WS2812B 5050 RGB LED Built-in Full Color Driver Development Board (Straight) is a great collection of WS2812B RGB Addressable LED Modules in a straight PCB. WS2812B is an intelligent LED that includes the photo diode and an addressable controller chip both are available and integrated into a single 5050 Components package. The major advantages of these LEDs are that one can access each LEDs individually and control the light as each LEDs has a unique address. These small LEDs with merely a centimeter in diameter can be connected in a daisy chain manners and many numbers of LEDs can be connected.

This Straight LED PCB consists of 8 WS2812 LEDs. The pin out of this PCB is GND, VCC, Input, Output. The daisy chain connection will follow in a way that the Input of a strip will be the Output of previous strip.

Specification of WS2812 5050 RGB 8-Bit LED Development Board
Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.
The control circuit and the LED share the only power source.
Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.
Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s.
Cascading port transmission signal by single line.
Any two point the distance more than 5m transmission signal without any increase circuit.
When the refresh rate is 30fps, cascade number are not less than1024 points.
Send data at speeds of 800Kbps.
The color of the light were highly consistent, cost-effective.
120 degrees viewing angle
IC Chip: WS2812
Input Supply Voltage (VDC): 4 ~ 7, 5V Recommended
Length(mm): 80
Width(mm): 50
Height (mm): 3

Applications:
Decorative Lighting
LED lighting for special purposes
Irregular LED display
Notification Board
LED based notification display
Cascaded lighting