Categories
Brand: Unbranded
SKU: 6927
Availability: Out Of Stock
Rs.2,020.0

DC to DC Converter 12V24V to 5V 8A 40W Car Led Display Power Supply

Specifications:

 

The input voltage: DC12V/24V(9-35V)

 

 

Output parameters: DC5V 8A 40W

 

Size: 46*32*16mm

Weight: 65g

Module Properties: non-isolated buck module (BUCK)

Rectification: synchronous rectification

Minimum pressure: 0.5V

Efficiency: Up to 96%

Soft-start time: 500mS

Output ripple: 50mV (MAX) 20M-bandwidth

Operating Temperature: Industrial (-40 ℃ to +85 ℃) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat dissipation)

Full load temperature rise: 50 ℃

Load regulation: ± 1%

Voltage regulation: ± 2%

Dynamic response speed: 5% 200uS

Short circuit protection: sustainable, self-recovery.

Input Reverse Polarity Protection:  No, if necessary, enter the series diode

Product features:

1, using imported switching module is integrated manufacturing, quality is stable and reliable.

2, the synchronous rectifier technology conversion rates above 90%, heat, very low.

Three, the module has overvoltage, the flow, thermal, short circuit, etc, and can be automatic protection function in normal working conditions after recovery.

4, epoxy resin packaging, waterproof, moistureproof, earthquake, dustproof, use for a long time is stable and reliable.

5, ultra-thin, small size, high efficiency and easy installation use.

Application:

Bus, CMB, large trucks, motor car, solar power, bus display, taxi ad screen, absolutely no interference with radio taxi, car audio, LCD TV, LED, intercom and monitoring system.

Note:

1 Please be wired in strict accordance with the character, need to fuse the input - positive and negative polarity voltage is not reversed, it may damage the power supply module, the output voltage polarity is reversed may damage electrical equipment.

2 In order to ensure that the module can output enough voltage and power, make sure there is sufficient input supply voltage and power.

3, such as output multiple output lines with an average load, please, please hasty merger with load.

4, such as the maximum current value of the output of the power module should pay attention to the heat (preferably left to give the module a certain current margin, so that longer life, try not to use maximum)


Buy Electronics parts through EVE-eVision Electronics Pakistan, Pakistan's first online electronics store.

Write a review

Note: HTML is not translated!