MD0901 RS9110-N-11-24 Core Uart Interface to 802.11 B/G/N WiFi Antenna Module

The RS9110-N-11-24 module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial interface for data transfer. It integrates a MAC, baseband processor, RF transceiver with power amplifier; and all WLAN protocol functionality, networking stack in embedded firmware to make an 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host system or data source. The module is based on Redpine's 802.11n chipset - RS9110.

Features

• Compliant to 802.11b/g and single stream 802.11n
• Self-contained serial-to-wireless functionality - requires very little host processor bandwidth
• WPA/WPA2-PSK, WEP modes of security
• Host interfaces: UART
• Integrated TCP/IP stack
• Configuration through AT commands
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility.
• Single supply 3.1 to 3.6 V operation
• Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

Applications

• Seamless Wi-Fi connectivity for any equipment with a serial interface
• Industrial M2M communications
• Point of Sale Terminals
• Metering
• Security Cameras & Surveillance Equipment
• Warehousing
• Digital Picture Frames
• Logistics and Freight Management
• Several Medical Applications including Patient Monitoring, Remote Diagnostics etc.

Specifications

• Network Standard SupportIEEE 802.11b/g/n
• Data Rates802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
  802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
  802.11b: 1, 2, 5.5, 11 Mbps
• Frequency Band 2.412 - 2.484 GHz
• Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, and 64-QAM 802.11b with CCK and DSSS
• Wireless Security WEP, WPA / WPA2(AES)
• Host Interfaces UART
• Network Protocols TCP, UDP, IPv4, ARP, ICMP, DHCP Client
• WLAN Functions Power save modes, Ad-hoc and Infrastructure modes
• Supported UART baud ratesSupports standard baud rates from 9600bps to 3.6Mbps
• Configuration AT commands (for UART)
• Operating TemperatureIndustrial Grade -40ºC to +85ºC
• Supply Voltage 3.1 - 3.6 V
• MD0901 Dimensions 33 mm x 24 mm