6Pin FTDI FT232RL USB To Serial TTL RS232 Adapter Module

6Pin FTDI FT232RL USB To Serial Adapter Module USB To TTL RS232 Arduino Cable

Specifications:

New USB to TTL Serial Cable FTDI chipset FT232RL 1M  for Arduino UNO mini FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset.

The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB. RX and TX LEDs indicator

The cables are available with a 6-way SIL, 0.1" connector

TTL levels is 5V

The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD's FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB Each TTL-232R cable contains a small internal electronic circuit board, utilising the FT232R, which is encapsulated into the USB connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications .

Cables are FCC, CE, RoHS compliant and are available.

Cables are available with either a 6-way SIL,0.1”pitch connector, a 3.5mmAudio Jack, an 8 way, keyed 2mmpitch connector (intended for use with VMUSIC2 or VDRIVE2) or bare, tinned wire ended connections

The USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.8mlong and supports a data transfer rate up to 3 Mb aud

Red wire: 5V

Black wire: GND

White wire: RXD

Green wire: TXD

Yellow wire: RTS

Blue wire: CTS

Note: Drivers can be downloaded from the link given below

http://www.ftdichip.com/FTDrivers.htm