Categories
Brand: Unbranded
SKU: 7479
Availability: Out Of Stock
Rs.13.0

Product details of 5mm Red Flash Self Flashing Blink Water Clear Bright LED
These are 5mm self flashing LED and can be used in any general purpose circuits where there is a need of blinking LED.

Specification of 5mm Red Flash Self Flashing Blink Water Clear Bright LED
Emitted Colour: Orange in Flash
Flash Rate: about 0.7 second, about 80 times per minute
Size (mm): 5mm
Lens Colour: Water Clear
Forward Voltage (V): 3.0 ~ 3.6
Reverse Current (uA) : <= 30
Luminous Intensity Typ Iv (mcd) : 8000(Typical) ~ 10000(Max)
Viewing Angle: 20 Degree
Pin Length: 28.5mm and 26.5mm















<ul>
    <li><span style="color:#000000;">Microcontroller ATmega328 DIP</span></li>
    <li><span style="color:#000000;">Operating Voltage 5V</span></li>
    <li><span style="color:#000000;">Input Voltage (recommended) 7-9V</span></li>
    <li><span style="color:#000000;">Input Voltage (limits) 6-20V</span></li>
    <li><span style="color:#000000;">Digital I/O Pins 14 (of which 6 provide PWM output)</span></li>
    <li><span style="color:#000000;">Analog Input Pins 6</span></li>
    <li><span style="color:#000000;">DC Current per I/O Pin 40 mA</span></li>
    <li><span style="color:#000000;">DC Current for 3.3V Pin 150 mA</span></li>
    <li><span style="color:#000000;">Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM</span></li>
    <li><span style="color:#000000;">2 KB (ATmega328) EEPROM</span></li>
    <li><span style="color:#000000;">1 KB (ATmega328)</span></li>
    <li><span style="color:#000000;">Clock Speed 16 MHz</span></li>
</ul>



Product details of #pname#
5W Zener diode is a two-way switch means that it can conduct current in forward as well as reverse direction. It is a heavily doped diode and permits the reverse current when a specific voltage level is reached.
 
Specification of #pname#
Supply Voltage: #shortname##find:5W#
Type: Low Power Switching Zener Diode
Package: DO-15
Diode Configuration: Single
Zener Voltage Tolerance: 5%
Package Type: Through Hole
Dissipation Power: 5W
Dimensions: 10.7 x 7 x .1cm
Operating Temperature: -65°C to 200°C







Product details of #pname#
A Zener diode is one of the diode types that is often used at any electronics bench. That is because Zener diodes are almost always used in power supply circuits and wave shaping circuits. Zener diodes are just like a regular PN junction diode, athough it is heavily doped. This makes the diode behave differently than a signal diode when it operates in the reverse bias region.

Specification of #pname#
Product Name: Color Ring Inductor
Power: 1W
Inductance: #shortname##find:1W#
Inductance Tolerance: ±10%
Material: Epoxy Resin, Metal, Inductor
Body Size: 5mm x 12mm
Lead Diameter: 0.5mm
Total Length: 6cm

 


Product details of #pname#
Heat shrink tubing, also known as heat shrinkable protective sleeves, provides insulation protection for wires, cables and wire terminals . It has high temperature shrinkage, soft flame retardant, insulation and corrosion resistance, etc. It is widely used for insulation protection of various wire harnesses, solder joints and inductors, and rust and corrosion resistance of metal pipes and rods. The item is mainly used for wire connection, solder joint protection, electronic device protection and insulation treatment, metal surface protection etc.

Specification of #pname#
Material: Polyolefin
Shrinkage Ratio(Actual:After Shirk): #shortname##find:Heat Shrink#
Shrink Ratio - Shrinks down to half its size
Use temperature scope: -55 degree ~ 125 degree
Rated voltage: 600 V
Cutting method: Scissors or sharp knife
Certification: UL, CSA certification, a fire-retardant standards;
Product is  RoHS Compliant.







1:.5mm Heat Shrink Tube Sleeve Shrinkable Black (Per Meter)





Product details of #pname#
A ceramic capacitor is a fixed-value capacitor in which ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications.

Specification of #pname#
Capacitance: #shortname##find:50V Ceramic Disc#
Voltage Rating:    50V
Mounting: Through Hole
Shape: ‎Disc
Material: ‎Ceramic
Accuracy: ±20%
Operating Temperature Range: +10°C to +85°C







0.1uH 1/4W Fixed Axial Leaded Inductor



1uH axial leaded inductor featuring an epoxy resin coating providing high reliability, suitable for general applications including decoupling, RF blocking and suppression.

Inductance: 1uH
DC current max: 700mA
DC resistance: 0.12Ω
Body dimensions: 3 x 8mm (Diameter x Length)
Lead dimensions: 0.55 x 27mm (Diameter x Length)

1uH 1/2W 0410 Color Ring Axial Lead Type Inductor is a small lightweight inductor. Its compact design is ideal to use in electronic devices. The inductor has a coating of epoxy resin which is resistant to humidity and thus improves the life of the same.

Additionally, this inductor has relatively long leads which provide the ability to bend to be automatically inserted into the PCB. This inductor can provide a high resonant frequency along with a high Q factor. It is also RoHS compliant.
Applications:

    Electronics Products
    Communication Equipment
    Computer Devices
    TV, VCR, Radios and so on.

Note:

Images for reference only. The actual product is as per product title.

Specifications:

    Design to be compact, small and light-weight
    Contribute to be high Q and self-resonant frequency
    Coating epoxy resin for long-life humidity resistance
    RoHS Compliant
    
    Additional information
Inductance    

1 H
Tolerance(%)    

10
Mounting Type    

Through Hole
DC Resistance (DCR)(m) at 20C    

150
Current Rating (A)    

0.8
Frequency(Hz)    

25.2M
Operating Temperature Range (C)      

-40 to 85
Length (mm)    

7
Width (mm)    

3 (Body Diameter)
Weight (gm)    

5

 EU RoHS
    Compliant with Exemption
ECCN (US)
    EAR99
Part Status
    Active
HTS
    8504508000
SVHC
    Yes
SVHC Exceeds Threshold
    Yes
Automotive
    No
PPAP
    No
Type
    RF Choke
Technology
    Drum Core
Core Material
    Ferrite
Inductance (H)
    3.3u
Tolerance
    10%
Inductance Test Frequency (Hz)
    1M
Maximum DC Current (A)
    3.5
Maximum Saturation Current (A)
    5
Maximum DC Resistance (Ohm)
    0.065
Minimum Quality Factor
    60
Quality Test Frequency (Hz)
    2.52M
Minimum Self Resonant Frequency (Hz)
    100M
Mounting
    Through Hole
Lead Style
    Axial
Number of Terminals
    2
Minimum Operating Temperature (°C)
    -55
Maximum Operating Temperature (°C)
    125
Packaging
    Tape and Reel
Product Diameter (mm)
    6.5
Product Length (mm)
    11.5
    
    
    
    1mH Axial Color Ring Inductor
    Power Rating = 1/2 Watt
    Tolerance = 10%
    Inductance = Fixed


Buy Electronics parts through EVE-eVision Electronics Pakistan, Pakistan's first online electronics store.

Write a review

Note: HTML is not translated!